Installing The Interface - Metra 99-5722 Instrucciones De Instalación

CONNECTIONS TO BE MADE
4-pin harness with yellow RCA jacks:
This harness is to be used to add an aftermarket backup camera to the touchscreen display, if
so desired.
• Connect the Yellow RCA jack labeled "Rearview camera", to the RCA jack on the aftermarket
backup camera.
Note: If this method is chosen, the backup camera option must be enabled in the
Configuration Settings Screen.
• Disregard the Yellow RCA jack labeled "AUX video", it will not be used in this application.
12
(CONT.)
With the key in the off position:
1. Connect the 5722 harness into the touchscreen display, ports "A" and "B",
and then to the wiring harness in the vehicle.
2. Connect the 4-pin harness with yellow RCA jacks into port "C" in the touchscreen display.
3. Disregard ports "D" and "E", they will not be used in this application.
4. Port "F" is an update port for future software upgrades.
5. Locate the factory antenna connector in the dash and complete all necessary connections to
the radio. Use the antenna adapter provided to adapt the factory antenna connector to the
aftermarket radio.

INSTALLING THE INTERFACE

A
C
D
F
B
E
|
386.257.1187 MetraOnline.com