Respiratory Filters And Respiratory Inlet Coverings; Breathing Hoses; Carrying Systems; Rechargeable Batteries - Dräger X-plore 8000 Instrucciones De Uso

Control panel
► Illustration on the fold-out page (Figure D)
1 Rechargeable battery status indicator
2 Residual particulate filter capacity indicator
3 On/off button
4 Flow rate indicator
5 Reduce flow rate
6 Increase flow rate
Display on control panel
Indicator Meaning
Battery capacity depending on number
of displayed segments:
Segments light up
> 75 % (4 segments)
in green.
> 50 % (3 segments)
> 25 % (2 segments)
< 25 % (1 segment)
Residual capacity of particulate filter
depending on number of displayed
Segments light up
segments:
in green.
> 75 % (4 segments)
> 50 % (3 segments)
> 25 % (2 segments)
< 25 % (1 segment)
Flow rate intensity depending on number
of displayed segments:
high flow rate (3 segments)
Segments light up
medium flow rate (2 segments)
in green.
low flow rate (1 segment)
Segments blink Malfunction (see section 4 on page 11)
yellow or red.
1 The residual capacity of the chemical cartridge or the chemical
cartridge components of the combination filter cannot be indicated.
Warning devices
The blower unit displays malfunctions with segments blinking
red or yellow (see section 4 on page 11). The blower unit will
also trigger an sound and vibration alarm.
NOTICE
i
i
Depending on the thickness and material of the
clothing, the vibration alarm might not be perceived.
X-plore 8000
2.2.2

Respiratory filters and respiratory inlet coverings

Respiratory filters and respiratory inlet coverings are described
in separate Instructions for Use.
The respiratory inlet covering types full facepiece and hood/
helmet/protective visor have varying flow ranges (see section
9.1 on page 14). The blower unit automatically detects the
respiratory inlet covering type and automatically selects the
appropriate flow range.
2.2.3

Breathing hoses

The following breathing hoses are available:
standard hose

flexible hose for increased comfort

Both breathing hoses are available for each of the following
respiratory inlet covering types:
plug-in connector (hood)

bayonet-type connector (helmet and protective visor)

round-thread connector (full facepiece)

1
2.2.4

Carrying systems

► Illustration on the fold-out page (Figure E)
1 Connection plate
2 Webbing
3 Clips on ends of the belt
4 Buckle
The following carrying systems are available:
Standard belt

The standard belt consists of a textile webbing and press
studs to attach comfortable padding.
Decontaminable belt:

The decontaminable belt has a smooth plastic webbing
and is particularly recommended for decontamination.
Welding belt:

The webbing of the welding belt consists of leather. The
welding belt is intended for welding applications.
2.2.5

Rechargeable batteries

► Illustration on the fold-out page (Figure F)
1 Battery lock button
2 Battery status indicator
3 Button to display battery capacity
4 Name plate
The rechargeable Li-ion batteries are specially designed for
use with the powered air purifying respirator. A long-life
rechargeable battery is also available in addition to the
standard rechargeable battery.
The battery status indicator shows the battery capacity while
you charge the unit with the standard charger or when you
push the button. The segments of the battery status indicator
are flashing while you charge the unit.
Description
7