JANE MICRO Manual Del Usuario página 21

5.- FITTING ONTO A JANE PUSHCHAIR
To fasten the JANE MICRO carrycot onto a Jane chassis, posi-
tion the carrycot so that the child's head is facing forwards
and insert the Profix connectors into the slots on the armrests
of the chassis, that are designed for this; listen for the click
indicating it is fastened. 5-5A
TAKE CARE! Before using it, make sure that all the locking
catches are closed.
To release the carrycot, pull the unlocking buttons on the
connectors upwards and separate the JANE MICRO folding
carrycot from the pushchair by pulling it upwards.
To improve the balance of your MICRO carrycot when it is
fitted onto your pushchair you can use the fastening system
following the instructions.
- MUUM 6
- RIDER 7
- CROSS CLASSIC 8 - 8A - 8B
WARNING: Unlock the system before removing the carrycot.
6.- MAINTENANCE
Clean the plastic parts with soap and warm water, then care-
fully dry all the components.
Hand wash at temperature no higher than 30° C. Leave to dry
naturally in a shaded place.
If the upholstery is exposed to sunlight for prolonged periods
of time it may affect the colour of the fabric.
Your CAPAZO MICRO baby carrier has a guarantee with pre-
cise specifications for correct maintenance, it is important to
5B keep these for perfect validity.
For your safety and the good conservation of this product, it
is important to bring it to one of our official workshops for
regular inspections.
21