Tabla De Contenido; Symbols Used In This Manual; Symbols On The Power Tool; Technical Specifications - Flex PE 8-4 80 Instrucciones De Funcionamiento

PE 8-4 80
Contents
Symbols used in this manual . . . . . . . . . 3
Symbols on the power tool. . . . . . . . . . . . 3
Technical specifications . . . . . . . . . . . . . 3
Overview . . . . . . . . . . . . . . . . . . . . . . . . . 4
For your safety . . . . . . . . . . . . . . . . . . . . 5
Noise and vibration . . . . . . . . . . . . . . . . . 7
Operating instructions . . . . . . . . . . . . . . . 8
Maintenance and care . . . . . . . . . . . . . . . 9
Disposal information . . . . . . . . . . . . . . . 10
Guarantee . . . . . . . . . . . . . . . . . . . . . . . 10

Symbols used in this manual

WARNING!
Denotes impending danger.
Non-observance of this warning may result
in death or extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result
in slight injury or damage to property.
NOTE
Denotes application tips and important
information.

Technical specifications

Tool Ø max.
Speed
Power input
Weight (without power cord)
Protection class

Symbols on the power tool

V ............... volts
~
............... alternating current
Hz ............ hertz
A ............... amperes
n................ maximum speed
n .............. no load speed
o
/min ........... revolutions per minute
D.max ....... maximum tool diameter
Machine type
mm/in
r.p.m.
A
kg
Before switching on the power
tool, read the operating manual!
Wear goggles!
Double insulation for safer
operation (see page 7)!
Polisher PE 8-4 80
80/3
1300-4000
7.0
1.9
II /
3