Bradley Terreon TDB3104 Manual Del Usuario página 14

TDB3104, WF3204
Adaptive infrared assembly for B drain and H drain units
5b
without Tie Pipe option continued...
Place the infrared module assembly on top of
sprayhead. Rotate until actuator module locks in
D
with tie bar. Drop two infrared module wires down
the support tube. Make sure infrared module
windows are facing away from the wall.
Skip to step F for units without soap.
E
For units with soap option, slide the spacer and
soap dispenser over the 1-1/2" pipe.
Position the upper tie bar slightly below the module
F
or soap dispenser and fasten securely to vent pipe
with set screws provided. Secure top cover to tie
bar with two cap screws provided.
G
Connect supply stops onto stub-outs. Connect
flexible hoses to supply stops.
14
Valve Assembly
(S45-2504)
Flexible
Hose
Stop
1/15/2013
Unit with "B" Drain and IR Module Shown,
Soap
Dispenser
Module
Cover
Tie Bar
Support Tube
Standard (S57-005)
TAS/Juv (S57-006)
3/8" Tube to
Sprayhead
Control Valve
Thermostatic Mixing
Valve Assembly
Also Available with "H" Drain
Sprayhead
(S05-054B)
Do not apply pipe sealant to
compression fittings.
Volume
Solenoid Valve
Assembly
Bradley • 215-1078 Rev. T; ECN 12-00-004
Installation
Top
Cover
Spacer
IR Module
Assembly
(S50-367)