Valve And Tubing Connections - Bradley Terreon TDB3104 Manual Del Usuario

Installation
6

Valve and tubing connections

Flush supply lines before making connections.
Do not apply pipe sealant to compression fittings.
Attach hot and cold flexible supply lines to
mixing valve assembly, two places. Make
A
sure the hot supply is connected to the hot
inlet on the valve (marked with the letter "H")
and the cold supply is connected to the cold
inlet on the valve (marked with the letter "C").
B
Hang valve assembly on pedestal valve
bracket.
C
Use wire tie to secure valving to valve
bracket.
Bradley • 215-1078 Rev. T; ECN 12-00-004
Valve Bracket
Volume
Control
Thermostatic
Mixing Valve
Flexible
Hosing
Cold
Supply
TDB3104, WF3204
3/8" Tube from
Sprayhead
Pedestal
1/15/2013
Flexible
Hosing
Hot
Supply
Rear
15