Eiki LC-XNS2600 Guia De Inicio Rapido página 11

Turn off the projector
1. Press the POWER button on top control
or on the remote control, and "Power off?"
appears on the screen.
2. Then, press the POWER button again in 4
seconds. The POWER indicator starts to
(You can select the level of fans' quietness
and running speed.). Now you can unplug
the AC power cord even if the fans are still
running.
3 When the projector has cooled down enough
to be turned on again, the POWER indicator
To maintain the lamp life, once you turn
the projector on, wait at least 5 minutes
before turning it off.
Do not operate the projector
continuously without rest.
Continuous use may result in shortening
the lamp life.Turn off the projector and
let it stand for about an hour in every 24
hours.
Power off ?
"Power off ? " disappears after 4 seconds.
Adjusting
11