Explanation Of General View; Important Safety Instructions - Makita BTW150 Manual De Instrucciones

Ocultar thumbs Ver también para BTW150:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
ENGLISH
(Original instructions)
1
Red part
2
Button
3
Battery cartridge
4
Switch trigger
5
Reversing switch lever
6
Socket
SPECIFICATIONS
Model
Capacities
Standard bolt ............................................... M10 – M16
High tensile bolt............................................. M8 – M12
Square drive ........................................................12.7 mm
–1
No load speed (min
)....................................... 0 – 2,300
Impacts per minute............................................ 0 – 3,000
Max. fastening torque......................................... 150 N•m
Overall length ..................................................... 193 mm
Net weight .............................................................. 2.0 kg
Rated voltage ................................................. D.C. 14.4 V
• Due to our continuing programme of research and
development, the specifications herein are subject to
change without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-
Procedure 01/2003
Intended use
The tool is intended for fastening bolts and nuts.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
CORDLESS IMPACT WRENCH SAFETY
WARNINGS
1.
Hold power tool by insulated gripping surfaces,
when performing an operation where the fas-
tener may contact hidden wiring. Fasteners con-
tacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator
an electric shock.
2.
Wear ear protectors.
3.
Check the socket carefully for wear, cracks or
damage before installation.
4.
Hold the tool firmly.
5.
Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
4

Explanation of general view

7
Anvil
8
O-ring
9
Pin
10 Standard bolt
11 Fastening torque
12 Fastening time
6.
BTW150
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this instruc-
tion manual may cause serious personal injury.

IMPORTANT SAFETY INSTRUCTIONS

FOR BATTERY CARTRIDGE
1.
ENE036-1
2.
3.
GEA010-1
4.
5.
GEB049-2
6.
7.
8.
9.
SAVE THESE INSTRUCTIONS.
13 Proper fastening torque
14 High tensile bolt
15 Limit mark
16 Brush holder cap
17 Screwdriver
The proper fastening torque may differ depend-
ing upon the kind or size of the bolt. Check the
torque with a torque wrench.
Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using bat-
tery.
Do not disassemble battery cartridge.
If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
Do not short the battery cartridge:
(1) Do not touch the terminals with any conduc-
tive material.
(2) Avoid storing battery cartridge in a container
with other metal objects such as nails, coins,
etc.
(3) Do not expose battery cartridge to water or
rain.
A battery short can cause a large current flow,
overheating, possible burns and even a break-
down.
Do not store the tool and battery cartridge in
locations where the temperature may reach or
exceed 50°C (122°F).
Do not incinerate the battery cartridge even if it
is severely damaged or is completely worn out.
The battery cartridge can explode in a fire.
Be careful not to drop or strike battery.
Do not use dropped or struck battery.
ENC005-2

Publicidad

Tabla de contenido
loading

Tabla de contenido