Visual Inspection - AngelSounds JPD-100S (mini) Instrucciones

will be obtained if stored and operated at room temperature. See
Section 7 for Temperature Specifications.

The Product requires no calibration.

6.2 Visual Inspection

The product and its accessories should be carefully inspected prior to
installation, once every 16 months thereafter and each time the
equipment is serviced.

Carefully inspect the equipment for physical damage

Inspect all external connections for loose connectors or frayed
cables.

Verify that the Safety label on back of the product is clearly legible
INSTRUCTION
Examine the case
connectors
accessories
Examine
accessory cables
Examine
disposable
accessories
WARNING: After the visual inspection, if the Product and/or its
accessories are damaged please contact our Customer Service.
INSPECT FOR
Foreign substances
and
Damage or cracks
Foreign substances
Broken parts, cracks,
damage, or extreme
wear, broken or bent
connectors and pins,
after bending
flexing the cable
Expired product or
Product pads
RECOMMENDED
REMEDY
Clean the Product and
its
described.
Contact Our Customer
Service
Clean the cables as
described
Section 5
Replace cable if any
abnormalities
found.
and
Replace any products
approaching
their expiration dates.
13
accessories
in the
are
or past
as