Technical Data - SKF TMJG 100D Instrucciones De Uso

3. Technical data

Measuring range
Resolution
Total accuracy*
Compensated operating
Temperature range
Response time
Sensor
Calibration
Functions
Battery type
Battery life
Connection thread
Storage temperature
Protection
Survivable overpressure
Diameter x Height x Depth
Weight
* Total accuracy is based on use within the compensated operating temperature range
and includes linearity, repeatability and hysteresis.
SKF TMJG 100D
0-100 MPa / (0-14,500 psi)
0,02 MPa / (3 psi)
<0,2% FS
0 °C to 50 °C (32 °F to 122 °F)
400 μs
Piezo-resistive element
The pressure gauge is calibrated in a sealed
gauge mode with 1 bar absolute pressure as
zero reference.
ON/OFF, MAX pressure, MPa or PSI unit
selection. Automatic switch off 30 minutes after
last press of a button.
3 Volt Lithium cell CR 2430
1 400 hours (continuous operation)
G 1/4
-20 °C to 70 °C (-4 °F to 158 °F)
IEC 529, IP65
100 MPa / (14,500 psi) maximum
76 x 118 x 42 mm (3,0 x 4,6 x 1,3 in)
210 g (7,5 oz.)
5