Power Supply Interrupted During Printing; When The Ribbon Is Snapped - Hiti P720L Manual Del Usuario

Chapter 5. Error Message Handling

Power Supply Interrupted during Printing

In case of power supply interrupted while the printing, the Thermal Head will be kept on pushing
to Platen. Leaving this situation for a long time, the shape of Platen can be warped. In order to
avoid this situation, please follow the instruction below.
1. Turn off the power of the printer.
2. Turn on the power for 3 or more seconds after turning off the power.
3. Paper Jam is displayed on the LCD of the operation panel, open the front cover and take the
necessary action according to the instruction provided in 5-3, "Paper Jam".

When the ribbon is snapped

1. Stick the broken part of the ribbon with a tape.
2. Turn the ribbon on the rewinding side and
rewind the taped section completely and tightly.
5 - 4
HiTi P720L user manual