Stanley TM201 Manual De Usuario página 3

slices around the dial.) For example: to turn the timer
ON at 5pm and OFF at 10pm, push down all the pins
from 5pm to 10pm.
5 - Plug your electrical device directly into the timer.
The electrical device must be set to "ON" position for
the timer control to work properly.
6 - The switch on the timer must be set to the TIMER
position for the timer to work.
To use the Manual "Always ON" feature,
switch the ON / TIMER switch (located next
to the dial) to ON for "Always ON"
Be sure to set switch back to the TIMER
position for proper timer function.
In case of power failure, reset the time of
day as indicated in step 3.
SPECIFICATIONS
2 Grounded outlets and plug
Rated: 125VAC/60Hz/8A/1000W Resistive
8A/1000W Tungsten
500VA Electronic Ballast
1/2 HP Motor Load
AM
Pins
Down=ON
Up=OFF
ON
TIMER