Copyright 2012 Liberty Pumps Inc. All Rights Reserved - Liberty Pumps Ascent II-ESW Manual De Instalación

4-3-4 Access cover:
The access cover is secured to the main cover with five fasteners. If required, use the 3/16 Allen wrench supplied to
loosen the fasteners. Once the screws have been removed, the access cover can be lifted upward. Some manipulation
might be necessary if the Macerator is located directly under the toilet's reservoir tank.
a) Once the access cover is removed, the power cartridge can be slid towards the opening by grasping the handle of
the basket and pulling to the right towards the opening. In some instances, debris might be caught between the tank
and the basket so some manipulation might be required.
b) With the power cartridge fully slid over, the cutters should be in view at the center of the basket. Any obstruction or
object can be removed at this point. The cutters are very sharp and extreme caution should be used.
c) To replace the cutters the 3/16 Allen wrench (supplied) should be inserted into one of the holes located on the
basket floor. This will create a wedge preventing the blade assembly from turning. The locking fastener can be
unscrewed with the use of a 7/16" socket (1/4" drive). Once loose, the screw and cap can be removed by pulling
upward which exposes the two razor blades. Liberty Pumps recommends stainless steel blades, although any
common utility knife style razor blade with two holes can be used as a replacement. When replacing the razor blades
simply insert the blade onto the two pins. The cap and screw should then be replaced.
d) The base of the cutting cartridge can be replaced as well. After removing the razor blades a thin slotted screwdriver
can be inserted into the center hole and once engaged the base can be rotated counterclockwise until it is free.
©Copyright 2012 Liberty Pumps Inc. All rights reserved.
Once the access cover is removed pull the power
cartridge towards opening
To remove cap
Unscrew
fastener
Place Allen
wrench
in hole to prevent
cutter from
turning
Screw
Cap
Utility blade
Base
Cutting and health hazard,
caution must be used when
handling razor blades.
11