Liberty Pumps Ascent II-ESW Manual De Instalación página 59

3) Place the assembled toilet in front of the macerating tank and apply grease to the sealing lip of the
macerator. Then slide the discharge hub of the toilet into the rubber sealing ring of the macerator until the
mounting holes in the toilet base align with the holes in the floor.
4) Assemble the toilet as shown below. Be careful when tightening fasteners as to not crack the porcelain.
Refer to Fill and Flush Valve Instructions included with toilet tank packaging.
©Copyright 2011 Liberty Pumps Inc. All rights reserved. 4