Bartscher 707.127 Manual De Usuario página 52

CONTENTS
INSTALLATION
1.
1.0 GENERAL STANDARDS AND WARNINGS
1.0.1 INSPECTION TEST AND GUARANTEE
1.0.2 FOREWORD
1.0.3 MACHINE DESCRIPTION
1.0.4 GENERAL SAFETY STANDARDS
1.0.5 PREPARATIONS TO BE MADE BY THE CUSTOMER
1.0.6 INSTRUCTIONS FOR SERVICE INTERVENTION REQUESTS AND REPLACEMENT PARTS ORDERS
1.0.7 GLOSSARY OF TERMS
1.1 MACHINE TRANSPORT AND HANDLING
1.2 PACKING REMOVAL AND MACHINE POSITIONING OPERATIONS
1.2.1 Packing Removal
1.2.2 Machine Positioning
1.2.3 Cold room Light Installation
1.3 ELECTRICAL CONNECTIONS
1.3.1 Door switch connection
1.4 WATER SUPPLY CONNECTIONS
1.5 INITIAL OPERATION
1.5.1 Start Conditions
1.5.2 Pre-heating Instructions
1.6 DEINSTALLATION
1.7 PACKING DISPOSAL
2. TECHNICAL DATA
2.1 FLUIDS AND MATERIALS USED
2.2 POWER, WEIGHTS, NOISE LEVELS AND DIMENSIONS
3. OPERATION
3.1 DESTINED USE, INTENDED AND UNINTENDED USES
3.2 POSSIBLE DANGER AREAS, RESIDUAL DANGER AND RISKS, DEVICES USED
3.3 OPERATION LIMIT CHARACTERISTICS
4. INSTRUCTIONS FOR THE END USER
4.1 INITIAL OPERATION
4.1.1 Descriptions of the Electronic Control Panel
4.1.2 Starting the Machine
4.1.3 Temperature Setting
4.1.4 Defrosting
4.1.5 Switching on the Cold Room Light
4.1.6 Stopping the Machine
4.2 ALARMS AND SIGNALS
4.3 SAFETY PRESSOSTATS
5. ROUTINE AND PERIODIC MAINTENANCE
5.1 BASIC SAFETY STANDARDS
5.1.1 Principal Guidelines
5.1.2 Warnings
5.1.3 Emergency Operations in the Event of Fire
5.2 APPLIANCE CLEANING
5.2.1 Cleaning the Surfaces
5.2.2 Cleaning the Condenser
5.3 PERIODIC CHECKS
5.4 LONG PERIODS OUT OF SERVICE
6. SPECIAL MAINTENANCE
6.1 PROGRAMMING THE PARAMETERS
6.1.1 Parameters Description
6.2 CENTRAL CONTROL SYSTEM FAILURE EMERGENCY
6.3 FUSE REPLACEMENT
7. REFUSE DISPOSAL AND DEMOLITION
7.1 REFUSE STORAGE
7.2 DEMOLITION PROCEDURES
8. TECHNICAL DOCUMENTATION
(See Manual  )
53
GB