Tecno-gaz europa B pro Instrucciones De Uso página 79

A 637
Error in the access to the memory card
Reading of the T1 probe during sterilization above the
A 651
maximum limit
Reading of the T2 probe during sterilization above the
A 653
maximum limit
A 661
Error in the probe reading
A 662
Error in the probe reading
Error for failed pressure achievement during the first two
A 701
phases of the warm-up
Error for failed pressure achievement during the third
A 711
phase of the warm-up
Reading of the T1 probe during sterilization below the
A 751
minumum limit
Reading of the T2 probe during sterilization below the
A 753
minumum limit
A 781
Temperature of the 121° C cycle out o the maximum li mit
A 782
Temperature of the 134° C cycle out o the maximum li mit
Errors of out of maximum time during the first phases of
A 801
discharge
Errors of out of maximum time during the last phase of
A 811
discharge
A 901
Cycle interrupted due to power supply failure
In the event of one of the alarms persisting after some time, consult technical assistance.
ENGLISH
Reset and restart the
system
Reset and restart the
system
Reset and restart the
system
Reset and restart the
system
Reset and restart the
system
Reset and restart the
system
Reset and restart the
system
Reset and restart the
system
Reset and restart the
system
Reset and restart the
system
Reset and restart the
system
Reset and restart the
system
Reset and restart the
system
Reset and restart the
system Check the power
supply system of the
machine and of the room.
37