Use And Destination Of Use Of The Autoclave - Tecno-gaz europa B pro Instrucciones De Uso

ENGLISH
2

USE AND DESTINATION OF USE OF THE AUTOCLAVE

The autoclave is able to sterilize the three types of load provided for by the standard
EN13060:2009, especially:
METAL OR SOLID MATERIALS
Instruments with no cavities and no
obstacles to the penetration of steam
POROUS OBJECTS
Simple or composite materials that can
absorb fluids (fabrics, gowns, surgical
gauzes, dressings, etc)
HOLLOW OBJECTS
Materials or devices with cavities,
obstructions, etc. These are subdivided
into two types, classified according to
the length and diameter of the cavity.
Approximately:
TYPE B: cannulas, tubes or devices
with large passages.
TYPE A: turbines, hand pieces and
devices with blind or small holes
*Only for European Countries
The autoclave shall only have to be used for the sterilization of tools
and materials being compatible with the steam sterilization system.
Always make sure that the loads that need to undergo sterilization can
stand the temperatures scheduled for the selected cycle.
4
AUTOCLAVE
AUTOCLAVE
18L
max kg. 5
max kg. 5
max kg. 1,5 max kg. 1,75
AUTOCLAVE
20L
max kg. 6 max kg. 7
max kg. 6 max kg. 7
max kg. 2
24L