Change Of Door Opening Direction - Electrolux ERT 14001 W8 Libro De Instrucciones

Change of door opening direction

Should the setting-up place or handling
demand it, door-opening direction can be
refitted from right-handed to left-handed.
Following operations are to be done on
the basis of figures and explanations:
Pull out the plug from the mains
socket.
Tilt back the appliance carefully being
careful so that the compressor can not
touch the floor. It is recommended to
ask another person for help, who can
keep the appliance at this position
safely.
Unscrew the adjustable feet situated
on both sides (2 pieces), in addition
the screws fixing the lower door
holders (2 pieces) respectively the
screw on the other side.
Put over the pin in the lower door
holding plate in the direction of the
arrow.
Fix the plate on the other side leaving
the position of the door unchanged.
GB
Then screw in the one screw in the
place set free on the other side as
well as the adjustable feet (2 pieces)
and set up the box.
For refitting the upper door holder
take out the screws (2 pieces) fixing
the plastic top on the back of the box.
Push back the top and lift it from the
fixing elements.
Unscrew the screws fixing the upper
door holder (2 pieces).
After unscrewing turn over the pin in
the door holder plate in the direction
of the arrow.
Fit and fix the door holder plate on the
other side without displacing the door.
Put back the plastic top on the fixing
elements and pull it forward.
Fix the top with the screws (2 pieces)
on the back side of the box.
Put over the handle and the plastic
nails on the other side.
Put the appliance to its place, set it
level and plug it into the mains socket.
electrolux 35
GB