How to Use
Wash fruits and vegetables.
NOTE: Most fruits and
vegetables such as apples,
carrots, and cucumbers will
not need to be cut since they
will fit into Feed Chute whole.
It is recommended that fruits
or vegetables such as oranges,
melons, or mangoes are
peeled before placing in unit to
minimize impact on juice flavor.
Mangoes and other fruits with
pits or large seeds like peaches,
plums, and cherries MUST be
pitted before juicing.
6
840307000 final.indd 6
1. Ensure that unit is correctly
assembled (see page 5) and
place a glass or container under
Juice Spout.
TIP: To minimize cleanup, place a
plastic grocery bag in Pulp
Container to collect pulp. When
juicing is completed, simply
remove grocery bag containing
pulp.
w WARNING
Laceration Hazard.
Never use fingers to push food down the feed chute or to clear the
feed chute. Always use the food pusher provided.
2. Plug cord into 120-volt AC outlet.
Turn ON/OFF switch to ON (I).
NOTE: Do not allow Pulp Container
to overfill since this may prevent
correct operation or damage the unit.
3. With the motor running, place
food down the Feed Chute.
Using Food Pusher, gently guide
food down Feed Chute.
To extract the maximum
amount of juice, always push
Food Pusher down slowly.
Juice will flow into glass and
separated pulp will accumulate
in Pulp Container.
NOTE: Pulp Container can
be emptied during juicing by
turning Juice Extractor OFF ( )
and then carefully removing Pulp
Container. (Replace empty Pulp
Container before continuing to
juice.)
10/19/18 2:37 PM