Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
840125501 Ev03:840125501 Ev01
How to Assemble
Read and follow instructions in "Parts and Features—Before First Use."
1. Place separator on top of motor
base as shown on page 3.
2. Place cutter/strainer into separator
and gently push until firmly in place.
Once in place, the cutter/strainer
should spin easily.
3. Hook cover to base on one side.
How to Use
w WARNING
Laceration Hazard.
• Never use fingers or utensils other than the food pusher as a food pusher. Food
should be placed in food chute only when unit is operating. Food can be con-
tinuously placed in food chute without having to turn off unit.
• The cutter/strainer may fly apart during use if it is damaged. To reduce risk of
personal injury:
–Never wash cutter/strainer or other removable parts in a dishwasher.
–Always inspect cutter/strainer before each use.
–Do not use a cracked, bent, or damaged cutter/strainer.
1. For more information, see "Juicing
Tips and Techniques."
2. Cut food into pieces to fit the food
chute.
3. Plug cord into 120-volt AC outlet.
4. Be sure pulp bin is in place and a
juice container is under juice spout.
5. Turn switch to ON. The unit will not
turn on until safety latch has been
closed.
6. Place food in food chute and press
lightly with food pusher. NEVER USE
FINGERS OR UTENSILS OTHER
THAN THE FOOD PUSHER AS A
FOOD PUSHER. Food should be
placed in food chute only when unit
is operating. Food can be continu-
ously placed in food chute without
having to turn unit off.
4
10/29/08
2:40 PM
4. Make sure safety latch is in place;
5. Place pulp bin in place. Slide top in
Place cover on top
6. Place a cup in position, under juice
of separator and
cutter/strainer.
NOTE: Check the pulp bin frequently.
It is important to empty the pulp bin
when full and to clean out the separator.
7. When pulp bin is full, turn unit off. It
8. When juicing is completed, or when
Page 4
push in at bottom to lock.
DO NOT OPERATE UNIT UNTIL
SAFETY LATCH IS LOCKED.
first, then bottom, and snap into
place.
spout.
is very important to empty the pulp
bin when full. For best performance,
empty pulp bin and clean cutter/
strainer and separator often.
pulp bin or juice container need to
be emptied, turn unit off and unplug
from outlet. Immediately wash cut-
ter/strainer according to instructions.
Publicidad
Tabla de contenido
