INSTRUCTIONS OF USE
GETTING WEIGHED AND OBTAINING BODY FAT, BODY WATER, BODY MUSCLE,
BODY BONE, BMI AND SUGGESTED DAILY CALORIES PERCENTAGE
• Once all the data have been introduced in the memories, to get weighed and find
out this percentages, follow these steps.
• Press "SET". The display will show "0.0". Push again "SET" and next use the 3 and 4
pushers until your memory number appears on the screen.
NOTE: The scale always keeps the last results, and then you need to change the
memory if your memory is different to the last weighing. Push twice "SET" and the
memory data will flash on the display. Wait until "0.0" is showed on the display.
• Get on the scale and remain still. First your weigh will appear flashing on the screen.
Next it will appear the percentages in this sequence: body fat, body water, body
muscle, body bone, BMI and suggested daily calories.
NOTE: When the body fat percentage is showed on the display at the same time it
will appear also the following indications: UNDERFAT, HEALTHY, OVERFAT, OBESE.
This percentages except the weigh will vary twice and next the scale switches off.
The adjoined tables will give an orientation of these percentages.
BEAR IN MIND THAT
• If "Err" shows on the display it means the maximum weight of the scale has been
exceeded.
• You must proceed to change the batteries when the "Lo" symbol shows on the
display. To do that, open the lids placed in the back side of the appliance and change
the battery
ENVIRONMENT PROTECTION
• Dispose the appliance according to the local garbage regulations.
• Dispose the batteries according to the local garbage regulations.
• Never throw away the appliance or the batteries to the rubbish.
So you will help to the improvement of the environment.
• The batteries must not be mixed with other domestic residues.
12
ENGLISH