Danfoss TP9000 Guia De Instalacion página 12

Option 37 - Set time duration of override rule
(Option 36 set to 1 or 2)
This establishes the duration of a temperature
override available to the user. Press + until Option 37
is displayed, use V and Λ to select required setting.
GB GB
Setting 0 Next event (factory setting)
Setting 1 1 hour
PL
Setting 2 2 hours
Setting 3 3 hours
GR Setting 4 4 hours
Option 40 - Number of Events per Day (Heating)
ES
This sets the thermostat to operate with either 2,
4 or 6 switching events per day or to run it in stat
mode. Press + until option 40 is displayed, use Λ or
V to select required setting.
1
2
4
6
Option 41 - Operating Mode (Heating) (option 40 set to 2, 4, or 6)
This sets the thermostat to operate using either
5/2 day or 24 hour mode. Press + until option 41 is
displayed, use Λ or V to select required setting.
7
5-2 or A-B 5-2 Day programming or A-B programming
24
Option 60 - Number of events per day (Hot Water)
This sets the number of Hot Water on/off switching
times per day. Press + until option 60 is displayed,
use Λ or V to select required setting.
Setting 1 1 on/off event per day
Setting 2 2 on/off events per day
Setting 3 3 on/off events per day (factory setting)
12
Stat mode
Two switching events per day
Four switching events per day
Six switching events per day (factory setting)
7 Day programming (factory setting)
24 hour programming
TP9000