Basics; Product Specifi Cation - Danfoss TP9000 Guia De Instalacion

1.0 Basics

Please note: This product should only be installed by a
qualifi ed electrician or competent Heating installer, and should
be in accordance with the current edition of the IEEE wiring
GB GB
regulations.
PL
1.0 Product specifi cation
Specifi cation
GR
Power supply
ES
Switching action
Unit switch rating
Memory Backup
Heat Temperature Range
Setting
Factory Set Calendar
Clock
Remote Sensor Inputs
('A' models only)
Programme resolution
Timing Accuracy
Dimensions, mm (W, H, D)
Design standard
Control Pollution Situ-
ation
Rated Impulse Voltage
Ball Pressure Test
4
230V model
230 Vac, ±15%,
50/60 Hz
2 x SPDT internally linked, Type 1BS
230 Vac, 3(1)A
Retained for life of product
5°C - 30°C
Automatic Summer/Winter time
change
Can be set by installer for remote sen-
sor, limited sensor, window contact,
tele-switch or outdoor sensor
± 1 minute
± 1 minute
135 x 88 x 32mm
EN 60730-2-7 +EN60730-2-9
Degree 2
2.5 kV
75°C
24V model
24 Vac, ±15%,
50/60 Hz
24Vac, 3(1)A
TP9000