Hamilton Beach 35021 Manual Del Usuario página 9

Cleaning Your Fryer
1
Make sure fryer is turned to MIN.
Unplug from wall outlet. Wait
until oil has cooled. This can take
several hours.
4
Clean outside of base with hot,
soapy water. Do not immerse
unit in water.
840217100 ENv05.indd 9 840217100 ENv05.indd 9
2
Lift control panel up and out of
base. Do not drip oil on base.
5
Press OPEN button to release
and open lid. Hold base with one
hand; use other hand to slightly
tilt lid towards the control panel
and pull lid up.
Burn Hazard.
w WARNING
To avoid eruptions and/or spatter of hot oil, dry all fryer
components thoroughly before using.
Do not immerse heating element
assembly in water.
NOTE: To avoid damaging fryer,
use care when cleaning heating
element assembly. Gently wipe
with soft cloth dampened with
hot, soapy water.
6
TO REINSERT LID: Place lid on the lid
hinge, making sure the silver spring
lines up with the opening on the back of
the base. Slightly tilt lid towards control
panel; gently press lid down into place.
3
Lift oil tank from fryer and pour
out oil. Wipe all excess oil or oil
film from oil tank.
4/30/12 11:42 AM 4/30/12 11:42 AM
9