Responsibility Of The Operator; Personnel Qualification - WIKA TR33 Manual De Instrucciones

3. Safety
The instrument has been designed and built solely for the intended use
described here, and may only be used accordingly.
The technical specifications contained in these operating instructions
must be observed. Improper handling or operation of the instrument
outside of its technical specifications requires the instrument to be taken
out of service immediately and inspected by an authorised WIKA service
engineer.
The manufacturer shall not be liable for claims of any type based on
operation contrary to the intended use.

3.3 Responsibility of the operator

The system operator is responsible for selecting the thermometer
or protection tube, and for the selection of their materials, so as to
guarantee their safe operation within the plant or machine. When
preparing a quote, WIKA can only give recommendations which are
based on our experience in similar applications.
The safety instructions within these operating instructions, as well as the
safety, accident prevention and environmental protection regulations for
the application area must be maintained.
The operator is obliged to maintain the product label in a legible
condition.
3.4 Personnel qualification
WARNING!
Risk of injury should qualification be insufficient!
Improper handling can result in considerable injury and
damage to property.
▶
The activities described in these operating instructions
may only be carried out by skilled personnel who have the
qualifications described below.
▶
Keep unqualified personnel away from hazardous areas.
WIKA operating instructions model TR33
EN
9