Electrical Connection - WIKA TR33 Manual De Instrucciones

5. Commissioning, operation
5.1.1 Tightening torques for compression fittings
Sealing
Stainless steel ferrule
EN
Stainless steel bite-type
ferrule
PTFE ferrule
5.1.2 Tightening torque for the M12 mating connector or the M12
adapter
Select a tightening torque of 0.6 Nm.

5.2 Electrical connection

Depending on the type of application, the electrical connection must be
protected from mechanical damage.
The electrical connection is made via an M12 x 1 circular connector (4-pin).
Pt100 and Pt1000 output signal (standard)
■
4 ... 20 mA
Accessories: M12 x 1 Pt adapter to DIN EN 175301-803 angular connector
mA
14
M12 x 1 connector
Turns
1 ¼ ... 1 ½
1 ¼ ... 1 ½
1 ¼ ... 1 ½
Alternative pin assignments
possible. For further information see
order documentation.
Angular connector
WIKA operating instructions model TR33
Max. pressure in bar
100
100
8