Dometic BLUTEC 40D Manual De Instrucciones Para El Uso, Mantenimiento E Instalación página 12

– It is necessary to ensure that the installa-
tion area has been provided with all the
suction, power supply and drainage con-
nections required.
– During installation, respect the perimeter
GB
areas indicated by the manufacturer, also
bearing in mind all the other operations in
the surrounding areas. This requirement
must be implemented in such a way as to
comply with current laws on safety at work.
RULES FOR OPERATION AND USE
– As well as being suitably trained and in-
formed regarding use of the unit, the operator
must have the abilities and knowledge re-
quired for the type of work to be carried out.
– Even after adequate documentation, simu-
late a few test operations on first use, if nec-
essary, so as to identify the various controla
and their main functions, in particular those
relating to start-up and stoppage.
– Only use the unit for the purposes foreseen
by the manufacturer. Improper use of the unit
may result in risks for the health and safety of
persons, and in damage to property.
RULES FOR ADJUSTMENT AND MAINTENANCE
– Keep the appliance in a state of maximum ef-
ficiency, by carrying out the planned mainte-
nance operations
manufacturer. If these are properly carried
out, they will ensure the appliance provides
optimum performance, a longer working life
and constant compliance with the safety re-
quirements.
– Before carrying out any maintenance or ad-
justments, activate all the safety devices pro-
vided and evaluate the need to inform the
persons working on the machine and any
persons in the vicinity. In particular, make
sure that the surrounding areas are ade-
quately marked and prevent access to any of
the devices that might, if active, result in un-
expected dangers and risks to the health and
safety of persons.
foreseen by the
– Installation and connection must be carried
out according to the manufacturer's instruc-
tions. The person in charge must also take
into account all legal requirements and
rules, and must carry out all installation and
connection operations in a workmanlike
manner. When installation has been com-
pleted, before use, he must carry out a gen-
eral check to ensure these requirements
have been met.
– The appliance has been designed and built to
satisfy all the working conditions indicated by
the manufacturer. Tampering with any of the
devices in order to achieve performance lev-
els other than the ones foreseen may result in
risks for the health and safety of persons, and
in damage to property.
– Do not use the unit if the safety devices are
not properly installed and operating correctly.
Failure to comply with this requirement may
result in severe risks for the health and safety
of persons.
– Maintenance and adjustment operations
must only be carried out by persons author-
ised to do so, who must ensure that all the
necessary safety precautions are taken and
that the procedures indicated here are com-
plied with.
– All maintenance operations that require spe-
cific technical knowledge or special abilities
must only be carried out by qualified techni-
cians, who have esperience in the specific
sector of operation.
– To carry out maintenance operations in areas
that are not easily accessible or dangerouse,
ensure that suitable safety precautions are
taken for yourselves and others, in full com-
pliance with current laws on safety at work.
- 12 -
User manual