Information On Spare Parts - Dometic BLUTEC 40D Manual De Instrucciones Para El Uso, Mantenimiento E Instalación

Alarm
RESTART GEN?
GEN CAL
GEN WAIT
GEN ON
GEN OFF
RECOMMENDATIONS WHEN CHANGING PARTS
Before replacing any parts, activate all the
safety devices provided and evaluate the
need to inform the persons working on the
machine and any persons in the vicinity.
In particular, make sure that the surrounding
areas are adequately marked and prevent
access to any of the devices that might, if ac-
tive, result in unexpected dangers and risks
to the health and safety of persons. Should it
be necessary to change worn components,
only use original spare parts.
CHANGING THE WATER PUMP ROTOR
Proceed as indicated.
1 -Switch the appliance
off and leave it to
cool.
2 -Unfasten the screws
to dismantle the cas-
ing (M).
3 -Unfasten the screws
to remove the cover
(N).
4 -Extract and replace
the rotor (P).
5 -Fit the cover (N) and
fix it with the screws.
6 -Fit the casing (M) and fix it with the
Problem
Unit overheating
The unit is performing automatic set-
up prior to starting
The unit is paused before starting
Unit running
Unit off or ready for START

INFORMATION ON SPARE PARTS

casing (M)
- 31 -
Remedy
Switch the appliance off and leave it to
cool.
Wait until the operation has ended
then start the unit
Wait until the operation has ended
then start the unit
The manufacturer will not be liable for any
damage to persons or components deriving
from the use of non-original spare parts and
from repairs carried out without the authori-
sation of the manufacturer.
rotor (P)
cover (N)
screws when this operation has been
completed.
GB
IDM - 40200702200.tif
User manual