RECOMMENDED LUBRICANTS
Use oils and lubricants with characteristics
the same as those indicated in the table.
GB
CHECK OIL LEVEL
Proceed as indicated.
1 -Turn the unit on and
allow it to warm up for
a few minutes.
2 -Turn the unit off.
3 -Wait for a few min-
utes to allow all the oil
to flow into the sump.
4 -Open the door (A).
5 -Extract the dipstick
(B) and check the oil
level; top up if neces-
sary. For the amounts
of oil, see "Technical data".
Important
The oil level must be between the mini-
mum and maximum marks.
Do not mix oils with different characteris-
tics or from different manufacturers.
6 -Close the door (A) when the operation
has been completed.
- 26 -
IDM - 40200702700.tif
rod (B)
door (A)
IDM - 40200701700.tif
User manual