Troubleshooting - ARIETE 1366B Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48
scrapping, you must separate the various materials used in making the machine and dispose of
them based on their composition and on the legal provisions in force in the country of use.

TROUBLESHOOTING

If there are problems with operation, immediately turn off the machine
Problems
Causes
The coffee
There is little water and the
maker does
pump does not suck it up.
not supply
steam.
The steam exit hole on the
dispenser wand is clogged
Coffee over-
of ground coffee has been
being correctly tightened into
its housing.
have remained on the gasket
seat.
The hole of the silicone disc
is clogged.
containing coffee grounds are
clogged.
Solutions
check that the water level in the tank is normal.
mark.
the hole of the dispenser wand with a pin.
because any remaining pressure could cause
splashes or squirts. Clean the coupling seat
placing the correct quantity of coffee in the
Clean the seal with a toothpick or a sponge
bending it slightly on the sides in order to free
the centre hole of any residue of coffee groun
because any remaining pressure could cause
the instructions provided in the package.
23

Publicidad

Tabla de contenido
loading

Tabla de contenido