Applicable only for Germany:
CAUTION
When cleaning the insides of
pipes with a hose line, the ac-
cident prevention regulation
BGR 500, Chapter 2.3.6 must
be adhered to!
Application
Illustrations on Page 3
Illustration
Press the coupling of the pipe cleaning hose into
the bayonet connection of the high-pressure gun.
Turn the coupling part by 90° until it locks into
place.
Illustration
Insert the pipe cleaning hose into the pipe to be
cleaned up to the red mark.
Illustration
Turn on the high-pressure cleaner.
Illustration
Press the lever of the hand spray gun and manually
guide the pipe cleaning hose with the automatic ad-
vance.
Note:
If the pipe cleaner encounters a clogged spot:
Press the lever of the high-pressure gun repeatedly
and release again.
Repeat this cleaning process if necessary or with
severe contamination!
DANGER
Pull the pipe cleaning hose out of the pipe up to the red
mark with the high pressure cleaner running.
Illustration
Switch off the high pressure cleaner.
Illustration
Pull the pipe cleaning hose out of the pipe.
– 2
EN
7