Best PIK33D Instrucciones De Instalación página 12

18. OPERATION
The insert is operated using the (3) controls located beneath the front edge of the insert.
HC0014
1) Light switch
COOKTOP LIGHTING (HALOGEN)
The light switch turns the halogen lights ON and OFF.
Use shielded halogen bulbs (120 V, 50 W, type GU10), included.
BLOWER
The blower is operated using two (2) controls.
The blower ON/OFF switch turns the blower ON to the speed preset by the speed control. The blower must be turned ON and
OFF using this switch.
Turn the blower speed control counterclockwise to increase blower speed—clockwise to decrease speed.
HEAT SENTRY™
This unit is equipped with a Heat Sentry thermostat. This thermostat is a device that will turn on or speed up the blower if it
senses excessive heat above the cooking surface.
1) If blower is OFF—it turns blower ON to HIGH speed.
2) If blower is ON at a lower speed setting—it turns the blower up to HIGH speed.
The Heat Sentry can start the blower during a range top fire or other excessive heat situations even if the
hood is turned off. If this situation occurs, it is impossible to turn the blower OFF with blower switch. If
you must stop the blower, do it from the main electrical panel.
When the temperature level drops to normal, the blower will return to its original setting.
Test all insert switches.
1
2) Blower ON/OFF switch
!
2
WARNING
- 12 -
3
3) Blower speed control