Gb.7.3 Changing The Power Cable; Gb.7.4 Spares And Accessories - Tennant 3410 Instrucciones Para El Servicio

Tennant 3410 Instructions for Use
• Hold onto the tab of the filter bag trap door and
gently pull upwards. This will automatically
close the trap door (preventing any dust from
escaping) and the bag will slide upwards and
out of the tank. If the dust bag has been
removed, it should be put back into the
machine now.
• The new paper filter bag can now be installed
by pressing the carton flange onto the tank
coupling. You should hear a click in the
moment the rubber sealing of the paper filter
bag's flange jumps into the ring groove of the
tank coupling.
Home
• Before using the machine, please check
whether the rubber sealing of the carton flange
is placed in the ring groove of the tank
coupling.

GB.7.3 Changing the power cable

• The high quality power cable has conductor
cross sectional areas of 1 sq.mm and these
conductors are made up of many single
strands. A damaged cable can be easily
replaced. After disconnecting the plug from the
mains power supply, turn the machine around
until you see the back of the chasis. Release
the plug retaining clip by pressing its pins
backwards and upwards. Remove the old plug
with cable and reinsert the new plug with
cable. Now put the plug retaining clip back into
place.

GB.7.4 Spares and accessories

Should you require spares, accessories or
consumables for your Tennant 3410, please
contact your Tennant distributor.
Find... Go To..
For safety reasons only genuine
Tennant spare parts should be used!
Any unauthorised opening of the
appliance, technical modifications or
non-original parts will annul the
guarantee!
GB
25