After Recording A Video; Camera Settings - Nokia N95 8GB Guia Del Usuario

1. If the camera is in the image mode, select the video
mode from the active toolbar.
2. To start recording, press the capture key. The red
record icon ( ) is shown and a tone sounds,
indicating that recording has started.
3. To pause recording at any time, press Pause. Video
recording automatically stops if recording is set to
pause and there are no keypresses within a minute.
Select Continue to resume recording.
To zoom in or out of the subject, use the zoom key
in your device.
4. To stop recording, select Stop. The video clip is
automatically saved to the
of Gallery. The maximum length of the video clip
depends on the available memory.
To activate the front camera, select
secondary camera. To start recording a video, press
the scroll key. To zoom in or out, scroll up or down.

After recording a video

After you record a video clip, select the following from
the active toolbar (available only if
video is set to On in the video settings):
To immediately play the video clip you just recorded,
●
select Play ( ).
If you do not want to keep the video, select
●
( ).
Images & videos folder
Options Use
>
Show captured
Delete
To send the video clip using a multimedia message,
●
e-mail, or other connection methods, such as
Bluetooth connectivity, press the call key, or select
Send ( ). See "Write and send messages", p. 100.
See "Send data using Bluetooth
connectivity", p. 36. This option is not available
during an active call. You may not be able to send
video clips saved in the .mp4 file format in a
multimedia message.
You can also send the video clip to a call recipient
during an active call. Select
available during an active call).
To upload the video clip to a compatible online
●
album, select (only available if you have set up
an account for a compatible online album).
"Share images and videos online", p. 78.
To return to the viewfinder to record a new video
●
clip, press the capture key.

Camera settings

There are two kinds of settings for the camera: setup
settings and main settings. The setup settings return
to the default settings after you close the camera, but
the main settings remain the same until you change
them again. To adjust the setup settings, use the
options in the active toolbar.
adjust colour and lighting", p. 68.
Send to caller ( ) (only
See
See "Setup settings—
To change the main
67