Dismissing An Error Code - Polaris ROBOTIC Alpha iQ+ Manual Del Propietário

Page 24
User Issue
The cleaner is not cleaning
the pool effectively.

Dismissing an Error Code

From the Control Box:
After you have completed the troubleshooting solution steps, press any key (except the phone icon) to
clear the error code.
If the control box is in Standby Mode, press the Start/Stop button to show the on-screen display. After
you have completed the troubleshooting solution steps, press any key (except the phone icon) to clear
the error code.
From the iAquaLink
Press the error icon to display troubleshooting solutions. After you have completed the troubleshooting
solution steps, press Clear Error to return to normal operation. Or, press OK if you need to complete the
solution steps at a later time.
Possible Cause
Filter canister is full or dirty.
Brushes are worn.
Cable is excessively tangled.
App:
™
Suggested Solution
Dispose of debris and thoroughly clean the filter
canister with mild soap and a soft brush. Then,
re-submerge the cleaner (see: Clean the Filter
Canister).
Check the wear indicator(s) (see: Replacing
Wear Parts).
Untangle the twisted cord and lay in sun to
reduce memory (see: Cord Tangling).