gala gar GALA 160 PFC Manual Tecnico página 11

1. GENERAL DESCRIPTION. TECHNICAL CHARACTERISTICS.
The GALA 160 PFC are single-phase electronic technology appliances (INVERTER) designed for use as a continuous
current source for coated electrode (MMA) and TIG welding process. Their descending characteristic permits excellent
arc stability in the electrode welding process. The use of this technology has led to obtaining a lightweight and high
performances equipment.
GALA 160 PFC are characterised by implementing the Power Factor Correction technology, which optimises power
consumption. This control system allows the installation capacity full efficiency to be fully taken advantage of so that
it can maximise the welding current available without useless power losses.
This machine is the ideal solution for professional use in maintenance and assembly activities wherever is desired:
Great transportability and maximisation of power with optimised electrical energy supply (16 A plug).
-
Possibility of 3,25 mm electrode welding with limited installation power. Works with domestic electrical supply.
Allows welding of all types of electrodes, including aluminium and cellulosic electrodes.
-
Allows welding of a 3,25 mm electrode by connecting the machine to an extension cable of 3x2,5mm which
-
can be up to 250 meters long. You can even weld a 2,5 mm electrode with an extension cable of up to 500
meters.
Automatic adaptation to mains (95÷265 V). It works perfectly with a generator, adapting to the electrical
-
supply reducing the necessary power of the generator to the minimum level.
Automatic adaptation to mains (95÷265 V). Allows you to weld connecting it to any type of single-phase
-
electrical supply in any part of the world.
Technical characteristics.
Supply voltage (U1 – 1Ph. 50/60 Hz)
Maximum primary/effective intensity (I1max )
Primary effective intensity (I1eff)
No-load voltage (U2o ) – reduced (VRD function)
Continuous adjustment margin. (I2min -
I2max)
MMA functions: Hot Start, Arc Force, Antisticking
TIG arc-striking
IP mechanical protection class
Thermal insulation grade.
Dimensions W x H x L (mm)
Weight (kg).
NEVER USE THESE WELDING MACHINES TO DEFROST TUBES.
1.1. ACCESSORIES.
Although the electrode holder & earth clamps are supplied as standard with equipment, it is recommended,
however, the following accessories
REFERENCE
56612033
5777
USE ONLY THE RECOMMENDED SPARE PARTS AND ACCESSORIES.
UNEEN60974-1; UNEEN60974-10; 2004/108/CE; 2004/108/CE
DESCRIPTION
Complete Accessories Box for electrode welding.
Electronic protection shield (Automatic) - Dark tone 9/13
GALA GAR has a complete range of welding accessories where you can find those most
suited to your needs.
GALA 160 PFC
95 V ÷180 V
28 A (110 V)
16 A (110 V)
24 V
MMA 20÷110 A /30%
TIG 5÷110 A/35%
GALA 160 PFC
Ref.: 54100000
95 V ÷ 265 V
180 V÷265 V
22 A (230 V)
13 A (230 V)
24 V
20 ÷160 A/30%
5 ÷160 A/35%
•
Lift Arc
IP 23S
F
145 x 253 x 341
6,0 Kg.
11