Installing The Eyepieces (All Models); Installing The Photo Port (Szx-T/Ta) - Optika Italy SZ Serie Manual De Instrucciones

7.11.9 Installing the eyepieces (all models)

1. Remove the dust caps from the eyepiece sleeves
and insert the eyepieces. (Fig. 33)
2. Lock the eyepieces by tightening the locking
screw ①.

7.11.10 Installing the photo port (SZX-T/TA)

1. Loosen the fixing screws ① of the supplied photo
port and remove the existing photo port. (Fig. 34)
2. Insert the ring of the photo port ② making sure
to leave the fixing screw of the photo adapter ③
facing right. (Fig. 35)
3. Lock the fixing screws ①. (Fig. 34)
①
Page 26
①
F ig. 33 F ig. 33
①
①
F ig. 34 F ig. 34
②
③
F ig. 35 F ig. 35