Optika Italy SZ Serie Manual De Instrucciones página 35

Adjusting the horizontal block
1. Unlock the fixing knob of the stopper ② and move
it in a position suitable to user's needs. (Fig. 64)
2. Lock the fixing knob to set the movement limit.
Tilting the head holder
1. Loosen the Allen screw ③ (Fig. 65) on the top of
the head holde.
2. The tilting black part can be moved. Once the
desired angle is achieved, tighten the wrench
again.
Swivel the head
1. Unlock the fixing knob ④ and rotate the head to
the desired swivel angle (left or right), then tight-
en the knob again. (Fig. 66 - 67)
②
Page 35
F ig. 64 F ig. 64
③
F ig. 65 F ig. 65
④
F ig. 66 F ig. 66
F ig. 67 F ig. 67