I System Setup; I Preset Data Loading - Panasonic WV-CU161C/B Instrucciones De Operación

I System Setup (System Setup)
1. Display the WV-CU161C SETUP MENU.
2. Select SYSTEM SETUP by moving the joystick up or
down.
3. Press the PRESET/SET/PROGRAM PRESET button.
The SYSTEM SETUP menu appears on the monitor.
SYSTEM SETUP
CABLE COMP
SWITCH BUZZER ON
Cable Compensation Setting (CABLE COMP)
This item lets you select a compensation level to match to
transmission loss caused by cable extension.
1. Display the SYSTEM SETUP menu.
2. Select CABLE COMP by moving the joystick up or
down.
3. Select the most appropriate cable length by moving the
joystick to the right or left.
The initial factory setting is S.
S: Less than 500 m {1 650 ft}
M: 500 m {1 650 ft} to 900 m {3 000 ft}
L: 900 m {3 000 ft} to 1 200 m {4 000 ft}
(with RG-6U or 5C-2V)
Switch Buzzer Setting (SWITCH BUZZER)
This item lets you select whether or not to sound the switch
buzzer when a button is pressed.
1. Display the SYSTEM SETUP menu.
2. Select SWITCH BUZZER by moving the joystick up or
down.
3. Select the ON or OFF mode by moving the joystick to
the right or left.
The initial factory setting is ON.
S

I Preset Data Loading

(PRESET DATA LOAD)
The data settings preset to the camera are downloaded to
the controller. A set of preset data can be given a title by
the controller operation. The preset data with the title can
be uploaded to other cameras.
1. Display the WV-CU161C SETUP MENU.
2. Select PRESET DATA LOAD O by moving the joystick
up or down.
3. Press the PRESET/SET/PROGRAM PRESET button.
The PRESET DATA LOAD screen appears on the moni-
tor as shown below.
PRESET DATA LOAD
CAM1:
CAM2:
CAM3:
CAM4:
CAM5:
CAM6:
CAM7:
CAM8:
P : Data saved.
: No Data saved. (The factory default setting for all
I
cameras from CAM1 to CAM8 is
Downloading (DOWN LOAD)
1. Display the PRESET DATA LOAD menu.
2. Select a camera number between CAM1 and CAM8 by
moving the joystick up or down.
3. Press the PRESET/SET/PROGRAM PRESET button.
The camera number and download menu appear on
the monitor as shown below.
CAM1:
DOWN LOAD
UP LOAD
DATA TITLE
4. Select DOWN LOAD by moving the joystick up or down.
5. Press the PRESET/SET/PROGRAM PRESET button.
Downloading starts.
CAM1:
DOWN LOAD
UP LOAD
DATA TITLE
END
.)
I
Blinking
LOADING
21