Shutting Down; Complete Cleaning; Maintenance And Care; Maintenance Intervals - Tornado BR 47/35 ESC Manual Del Usuario

Shutting down

Complete cleaning

Set the appliance switch to 'dry vacuum
cleaning' position. Dry vacuum cleaning
is activated.
Let the pump pressure fall to 0 bar.
Set the appliance switch to "0".
Release the foot pedal.
Activate the lever to lock and the pedal to
raise the brush head. Brush head is
raised.
Release the rear wheels.
Drive out the machine from the working
position and the podium until it is on firm
ground.
Turn off device
Pull out the mains plug.
Drain off and disose the remaining deter-
gent fluid.
Drain out the dirt water and dispose it off.
Clean the inside and outside of the ma-
chine. Rinse the tanks with clear water.
Store the machine in a frost-free room on
an even and clean floor.
Lock the rear wheels.
Remove the cordon from the travellator/
escalator only when the entire working
area is dry again. There is risk of acci-
dent on account of slipping even if the
travellator/ escalator is slightly moist.
12
English

Maintenance and care

Danger
Risk of injury! Before doing any work on the
machine:
Set the appliance switch to "0".
Pull out the mains plug.
Lock the rear wheels.
Drain off and disose the remaining deter-
gent fluid.
Drain out the dirt water and dispose it off.
Cleaning the device
Warning
Risk of damage! Do not wash down the ap-
pliance with water and do not use aggres-
sive detergents.
Clean the outside of the appliance with a
damp cloth which has been soaked in
mild detergent.
Wipe the insides of the dirt water reser-
voir.
Clean the fluff filter.

Maintenance intervals

Tilt the machine in the maintenance po-
sition.
The escalator cleaner must be accessible
from the bottom side to perform any testing
or maintenance jobs on the machine.
Take the help of another person to tilt the
machine forward until it stands on the
front casing.
Daily before use
Check spray pattern of the nozzles.
Check if suction nozzles are dirty.