Maintenance Works - Tornado BR 47/35 ESC Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Check emergency stop function of the
foot pedal.
Press the foot pedal, set the appliance
switch to 'dry vacuum cleaning', the ap-
pliance must run. Release the foot ped-
al; the appliance must stop.
Get the machine repaired only by author-
ised customer service agents.
Check the locking of the rear wheels.
Get the machine repaired only by author-
ised customer service agents.
Check for wear and tear:
Roller brushes, intake brushes, combs,
guide rails, hoses, stopper and front
wheels. Replace stopper and front
wheels, if required, only through author-
ised customer service agents.
Check mains cable and plug for damage
or breakage. Get them replaced only
through customer service agent or an
electrician.
After 100 operating hours
Check if all fasteners are fastened tight-
ly.
Check the drive belt for tension and wear
(Customer Service).

Maintenance Works

Clean the fluff filter
Unscrew the tin cover plate using a torx
spanner.
Note
You will find a torx spanner in the holder of
the drainage hose of the dirt water reservoir.
Clean the fluff filter.
Replace the tin plate.
Replacing the roller brushes and the in-
take brushes
Loosen all the four screws and remove
the bearing lid.
Remove the roller brushes (large) and in-
take brushes (small) and replace them
(pay attention to the hexagonal intake of
the brushes!).
Also check simultaneously the combs
and the guide rails and replace or clean
them as required.
1
2
13
English

Publicidad

Tabla de contenido
loading

Tabla de contenido