Legs - Silvercrest SWWS 240 C2 Instrucciones De Uso

Legs

Once the wax beads 9 are completely melted:
1) Open the lid 7 by turning it anticlockwise slightly and lifting it
upwards .
2) Pick up a little wax using the flattened edge of the spatula 8 .
You can wipe off excess wax on the rim of the appliance .
3) Apply the wax to the skin in the direction of hair growth (from
the knee towards the heel) . The wax strips should have the
approximate thickness of an orange peel and the area of two
spatulas 8 laid side by side . You may have to add wax . Try to
make sure that one end of the applied wax strip (the end nearer to
your heel) is a little thicker as you will need to be able to grip this
end for removal .
4) After application, you can place the spatula 8 into the tray 6
on the edge of the appliance so that the spatula 8 projects over
the inner bowl 1 .
5) Wait about 30 - 60 seconds until the wax is dry .
6) Pull the skin taut with one hand . Grip the wax strip by the thicker
end and pull it off with a rapid movement against the direction of
hair growth (from your ankle towards your knee) .
Repeat the process for the remaining areas of skin .
7) When you are finished with the treatment, pull the plug from
the mains power socket to turn off the appliance . The control
lamp 2 goes out .
■ 78 │ GB │ MT
SWWS 240 C2