General Instructions - Chauvin Arnoux Multimetrix SL 105 Manual De Instrucciones

English

General Instructions

Introduction
Guarantee
Precautions and
safety measures
8
Thank you for using this Digital Sound Level Meter. It belongs to the
MULTIMETRIX range of products.
It is an extremely versatile device for measuring sound intensity in just
about any acoustic environment :
•
loud or soft,
•
highpitched, lowpitched, or broad-band,
•
intermittent or continuous.
You can use it to measure noise levels in
•
factories,
•
schools,
•
offices,
•
airports,
or to check acoustics of :
•
studios,
•
auditoriums,
•
home theater installations.
This equipment is guaranteed against any material defect or
manufacturing faults, in conformity with the general conditions of sale.
During this period, the equipment may only be repaired by the manufacturer.
He reserves the right to carry out repair or replacement of all or part of the
equipment.
If the equipment is returned to the manufacturer, forward transport is at
the expense of the customer.
The guarantee does not apply in the event of:
1. unsuitable use of the equipment or by association with
incompatible equipment
2. modification of the equipment without the explicit authorization of
the manufacturer technical services
3. operation by a person not approved by the manufacturer
4. adaptation to a specific application not provided for in the
equipment definition or in the operating instructions impact,
5. fall or flooding.
• Do not hold the meter directly between you and the sound source, as
this might produce an error of several decibels in the frequency range
above 100 Hz. Position the meter on an imaginary line between you
and the sound source.
• Handle the meter carefully. The microphone and meter movement are
fragile and might be damaged if the instrument is dropped. Do not
operate the meter at a range setting that causes "pegging" of the
needle. This could damage the sound levels.
Sound Level Meter