Astralpool VRAC Manual De Instalación Y Mantenimiento página 31

Válvula selectora automática
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

"Important: This instruction manual contains basic information with respect to safety
measures which should be adopted during installation and putting into service. For this
reason, it is essential that both the installer and user carefully read these instructions
before carrying out any installation or putting into service operations."
In order to obtain optimum performance from the automatic valve, it is recommended that the
instructions given below are strictly followed.
General safety prescriptions:
These symbols
respecting the corresponding prescriptions.
DANGER. Risk of electrocution. The lack of warning of this prescription involves a risk of
electrocution.
DANGER. The lack of warning of this prescription involves a risk of personal injury or material
damages.
WARNING. The lack of warning of this prescription involves a risk of damage to the automatic
valve or the installation.
GENERAL SAFETY REGULATIONS
GENERAL.
The valve described in this manual has been specially designed to provide correct water
circulation in the swimming pool during the various operational phases.
It has been designed to work with clean water at temperatures not exceeding 35ºC.
The installation must be carried out in accordance with the specific instructions for each
particular implementation.
Current in-force regulations for the prevention of accidents must be observed.
Any modification to the valve's electronic module or remote control unit requires the prior
authorisation from the manufacturer. Original spare parts and accessories authorised by the
manufacturer will guarantee greater safety. The manufacturer of this automatic valve is exempt
from all responsibility for any damage caused by non-authorised spare parts or accessories.
During operation, the valve's electric and electronic parts have electric power connected to
them.
Any work to the automatic valve and any equipment connected to it, must only be carried out
when the start-up devices have been disconnected.
The user must ensure that installation and maintenance work is carried out by adequately
qualified and authorised personnel, and these have previously carefully read the installation
and service instructions.
Automatic valve operational safety is only guaranteed by full compliance and respect of the
installation and service instructions.
The maximum voltage values must never be exceeded under any circumstances.
In the case of incorrect operation or a fault, please contact the closest manufacturer's
representative or technical assistance service.
indicate the possibility of danger as the consequence of not
3
ENGLISH

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

28268-010028624-0100

Tabla de contenido