Remote Control Programming; How To Operate The Programmer - Astralpool VRAC Manual De Instalación Y Mantenimiento

Válvula selectora automática
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3. REMOTE CONTROL PROGRAMMING

3.1 HOW TO OPERATE THE PROGRAMMER.

The programmer is fitted with a screen on which the entered commands may be read.
The menu consists of eight different screens which are shown below:
FILTRATION PROGRAM 1
on: 6:45
LENGUAGE SELECTED
ENGLISH
Day:
Time:
FILTRATION PROGRAM 1
on: 6:45
During operation of the module's motor, the control will display «WAIT! VALVE MOVING»,
when it stops and the pump comes on, the screen will display the function that is currently
being performed.
WARNING: The pump stops automatically when the position is being changed.
The keyboard:
ON: this is the main switch used for switching on, it will be automatically switched off after two
minutes. IMPORTANT: if the system is switched off during winter, the valve must be in the
CLOSED MOTOR: OFF position (manual function).
AUTO: the equipment is operating and carries out the programmed commands for filtration,
wash, back-wash and swimming pool lights. The screen will indicate NO COMMUNICATION and
should be held pointed at the module for some six seconds, so that it is programmed, after
which all the programmed information will be displayed .
Menu keys:
Menu forward: this key will move forward through the menu screens.
Menu back: this key will move backward through the menu screens
OK
key used to enter in the menu and confirm the entered commands.
+
+
used to increase the currently selected variable, also used for a positive reply
to the screen question (y/n).
_
-
used to decrease the currently selected variable, also used for a negative reply to
the screen question (y/n).
-
To go from AUTOMATIC to MANUAL, MANUAL should be pressed and the currently
MANUAL
operational screen will be displayed, for example, if the pump is filtering, the following
will be displayed on-screen:
FILTRATION
MOTOR : ON
off: 9:30
21-4-2003
15:30
off: 9:30
VALVE MOVING
BACK-WASH TIME
on: 20:45
POOL LIGHTING
on: 21:45
FILTER BACKWASH TIME
WAIT !
9
ENGLISH
off: 24:30
off: 22:30
20 sec.
RINSE TIME
30 sec.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

28268-010028624-0100

Tabla de contenido