Accessories; Use - Imetec ECO EXTREME PRO Instrucciones Para El Uso

EN
• Select the combination brush (4) or the accessory (21) suited to the surface to be
cleaned and connect the part to the telescopic pipe (3).
Combination carpet/floor brush (4)
Adjust the combination brush according to the type of flooring, using the brush position
toggle switch (4A) [fig. D1]:
• Brush position toggle switch (4A) set to symbol
• Brush position toggle switch (4A) set to symbol
Your appliance is equipped with the following attachments:
Crevice tool (21A): To clean corners and crevices, such as radiators, skirting boards,
blinds and awnings.
Upholstery nozzle (21B): To clean sofas, armchairs, upholstered chairs and curtains.
Dusting nozzle (21C): To clean small objects, audio and TV appliances, computers and
furniture.
Parquet brush (21D): Special brush to clean parquet floors.
NOTE:
The accessories can be connected to the suction telescopic pipe (3) or directly to
the handle (1).
Pull the power cable (14) completely up to the yellow mark, and insert the plug into the
socket. The yellow mark on the cable is before the end part of the cable marked in
red.
DO NOT PULL THE CABLE BEYOND THE RED MARK
Using the vacuum cleaner with the cable fully or partly wound involves
an overheating hazard!
NOTE:
A new appliance can develop odours the first few times it is used. These odours are
harmless and disappear shortly afterwards. Ventilate the room.
• Press the ON/Off button
• Adjust the suction force by means of the electronic power regulator (7).
Minimum: for curtains, fine and delicate fabrics.
Average: for standard cleaning, sofas, armchairs, upholstered chairs, rugs and carpets.
Maximum: for smooth floors.
• The suction power can also be changed by means of the manual adjusting device of
the air flow (2) found on the handle (1) [fig. E1].
Increases the suction power.
Closed:
Open: Reduces the suction power.
12

ACCESSORIES

USE

(8) once to switch the vacuum cleaner on [fig.f1].
: for hard flooring.
: for rugs and carpeting.