Symbols; Description Of The Appliance And Its Accessories; Assembly - Imetec MAX POWER ANIMAL CARE Instrucciones Para El Uso

EN
• Always use the appliance with a motor protection filter to prevent damaging
the motor and the vacuum cleaner.
• The power cable must always be fully unwound to prevent hazardous
overheating.
on position
protection class II
prohibited
DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES (Fig. A)
refer to Figure [a] in the illustrative guide to verify your appliance equipment. all the figures
are on the cover pages of these instructions for use
1. Handle
1a. cable eyelet
2. oN/oFF switch
3. power cable with plug
4. suction inlet
4a. suction inlet button
5. Multi-surface Brush
6. animal care turbo brush
6a. Transparent front
6B. Transparent front release buttons
6c. air nozzle slider.
7. outlet grille
8. outlet filter
9. dust collection system level indicator
10. appliance opening key
Before every assembly operation, always turn the appliance off and
remove the plug from the power socket!
• loosen the fastening screw (13) of the handle (1) and remove it.
• attach the handle to the body of the appliance, taking care to assemble it correctly [Fig.
B1].
• Insert the fastening screw (13) and tighten it clockwise [Fig. B2].
• Grip the aNIMal care MulTI-surFace brush (5) or TurBo BrusH (6) and
connect the part to the vacuum attachment (4).
10

SYMBOLS

11. dust collection system
12. Technical data
13. Fastening screw
14. automatic cable winding
15. electronic power control
ASSEMBLY [Fig. B]
Off position
automatic cable winding
Warning
11a. dust container
11B. dust container cover
11c. cover release key
11d. Filter protection grille
11e. cyclone filter
11F. cyclone filter cover
11G. Fastening flap
14a. cable compartment
14B. cable winding key