After Use; Troubleshooting - Casada BMS BETASONIC Manual Del Usuario

After use

40
1. After the massage programme is completed, return
chair to upright position by pressing the Recline Angle
Adjustment button.
Please make sure that the required recline
•
area around the chair is not blocked by ob-
jects.
To avoid injury, please ensure that your
•
arms or legs can't be pinched by gabs inside
the chair.
2. Press the power button to turn off the massage chair
and put the remote control back in the holder.
3. Turn off the main power switch.
4. Remove plug from power outlet.
Please do not pull on the power cord to
•
remove the plug.
Please do not unplug with wet hands.
•

Troubleshooting

If exceptional circumstances arise, stop use in order to prevent accidents and disconnect the plug. If the fol-
lowing measures do not resolve the situation, please contact our customer service centre.
Fault
The massage chair will not operate despite
•
being plugged in.
The massage chair is not responding to the
•
remote control.
The massage chair and the remote control
•
can't be operated.
Braintonics automatic programmes
•
cannot get startet.
Removal
1. Check whether the power cable from
•
the massage chair and the cable from the
remote control are inserted properly.
2. Check whether the switch on the massage
chair is set to „ON".
1. Check whether the power cable from
•
the massage chair and the cable from the
remote control are inserted properly.
2. The massage chair has an automatic
function to turn itself off, if it gets too hot.
Please disconnect the chair from the power
source for 30 – 50 minutes.
After using the massage programmes the
•
massage chair turns into the stand-by-mode
automatically. Please press the power-button
again to activate the chair.
Please make sure, that the braintronics-Box
•
and the chair are connected via USB-cable
and that they're plugged in properly.
41