Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
US
Safety precautions
Be sure to read this installation guide before installation. Install the Washlet according to this installation guide.
Follow the safety warnings and cautions.
This symbol indicates the
mishandling may result in death or
serious injury .
WARNING
Example of symbols
A
prohibited.
●
If your new Washlet is replacing a similar product that also has a base plate, use the base plate that comes
with the new product.
*The Washlet does not function with base plates from other products.
●
Replace any existing junction valve with the one that
came with the new product.
*An existing junction valve may not be used with the
new product.
●
While connecting the water supply to the water supply
hose be cautious not to cross-thread the connections.
*Cross-threading may cause water leakage.
●
Two crescent wrenches of equal size are required to tighten the connection between the water supply hose
and the junction valve.
WARNING
●
Do not install the product in a room where the humidity exceeds 90%RH.
(Otherwise, fire or electric shock may be caused.)
Use in wet place
prohibited
●
Connect the grounding wire to a place where it can be connected securely.
(Without grounding, electric shock may be caused if the product incurs trouble or electric leakage
occurs.)
Grounding
●
Be sure to insert the power plug properly in the outlet (120V AC, 60Hz).
(Otherwise, fire or electric shock may be caused.)
Required
●
Do not install the Washlet on moving bodies such as automobiles, boats and vessels.
(Otherwise, fire, electric shock or trouble may be caused.)
(The Washlet may dislodge and fall, causing injury.)
●
Do not use a damaged power plug or power cord, or loose socket outlet.
(Otherwise, fire or electric shock may be caused.)
Prohibited
●
Do not use a water supply that is not tap or potable well water (underground water.)
(Otherwise, skin inflammation, etc. may be caused.)
●
Do not use the Washlet with a power supplies other that those designated (120V AC, 60Hz).
(Otherwise, fire or electric shock may be caused.)
2
symbol indicates that an action is
This symbol indicates the
mishandling may result in injury or
physical damage .
CAUTION
A
symbol indicates that an action is
required.
End connection of
water supply hose
for Washlet
End connection of
water supply pipe
Publicidad
Tabla de contenido
