Ingeteam INGEREV Serie Manual De Instalacion Y Uso página 29

INGEREV CITY Wall, INGEREV CITY Ground
At the free RJ45 connector, connect the station to the next station on the communication ring (see dark
grey cable in the figure below).
The jumper of the communications card must remain in place.
3. Connect the rest of the charging stations as shown in the following figures.
First station
Communications card jumper
The jumper of the control card must be removed in all the stations except for the final station on the
communication ring, where it must be installed.
ABA2017IQM01_A - Installation and Operation Manual
Intermediate station
Control card jumper
Ingeteam
Modem
Communications
card jumper
Final station
Control card jumper
EN
ES
FR
IT
29